PA66 toughening cold grade

PA66 + 15% GF Toughening Cold enhancement grade / KY-NZ690G15 Injection molding machine Extrusion grade General level

Features:

⑴ high molecular weight

⑵ simple process, product shapes and diverse

⑶ can be made of large mechanical parts

⑷ low water absorption

Aromatic class

In the main chain in the introduction of benzene ring structure products high temperature, radiation resistance, corrosion resistance

Amorphous class

Amorphous transparent nylon

High transmittance, good dimensional stability

characteristic

1. Thermal properties: glass transition temperature (T g) and melting point (T m); high heat distortion temperature (HDT); long-term use of high temperature (UL- 746B); use temperature range; small thermal expansion coefficient.

2. Mechanical properties: high strength, high mechanical modulus, low latency, strong wear resistance and fatigue resistance.

3. Other: chemical resistance, electrical resistance, flame resistance, weather resistance, good dimensional stability.

Modified nylon features:

Injection grade modified nylon, injection grade enhanced nylon 66 material has good dimensional stability, high temperature resistance, easy processing and easy mold release. Division I can be based on customer needs different research and development; production, all materials can provide relevant testing and certification! Support customers to the relevant authority to detect testing agencies.  

Physical performance	Rated value	Unit system	Test Methods
density	1.08 to 1.16	G / cm3	ISO 1183
Flow rate (275 ° C / 1.2 kg)	40 to 60	G / 10 min	ISO 1133

 

Physical performance	Rated value	Unit system	Test Methods
proportion	1.13	G / cm3	ASTM D792
Shrinkage - flow	2.8	%	ASTM D955

 

Mechanical behavior	Rated value	Unit system	Test Methods
tensile strength	75.0	MPa	ASTM D638

Modified nylon shrinkage and specific gravity: According to your product requirements (such as: how much impact the product needs; high temperature; how much low temperature; anti-aging, etc.) require processing production!

 

English abbreviations	Chinese abbreviation	regulation      grid	ratio     weight	Shrinkage%
PA	Polyamide (nylon)	PA66	1.13-1.15	0.8-1.5
PA	Polyamide (nylon)	PA66GF30	1.38	0.5
PA	Polyamide (nylon)	PA6	1.12-1.14	0.8-1.5
PA	Polyamide (nylon)	PA6GF30	1.35-1.42	0.4-0.6
PA	Polyamide (nylon)	PA66 / PA6T	1.08-1.14	0.5-1.5
PA	Polyamide (nylon)	PA6 / PA12	1.06-1.08	1.1
PA	Polyamide (nylon)	PA6 / PA12GF30	1.31-1.38	0.3
PA	Polyamide (nylon)	PA6 / PA9T	1.08-1.1	1-1.5
PA	Polyamide (nylon)	PA6 / PA10	1.07-1.09	1.2
PA	Polyamide (nylon)	PA6 / PA10GF30	1.31-1.38	0.4

 

[1] The performance of the dye may be different from the above values.

[2] Typical values ​​refer to laboratory mean data, only for reference when used, and not as a product standard.

[3] For SGS, ROHS, UL yellow card and other reports, please call 13950087911 or contact online customer service.

Modified nylon related qualification: