PA6 flame retardant cold grade

PA6 Toughened grade plastic raw materials modified particles of natural color / transparent

PA6 modified material introduced:

Due to the strong polarity of PA, hygroscopicity is strong, and the dimensional stability is poor, but it can be improved by modification.

Flame retardant PA

As a result of PA in the addition of flame retardants, most of the flame retardant at high temperatures easily decomposed, the release of acidic substances, the metal has a corrosive effect, therefore, plastic components (screw, plastic head, Washers, flanges, etc.) to be hard chrome plating. Process, try to control the barrel temperature can not be too high, the injection speed can not be too fast, in order to avoid the material temperature is too high and decomposition caused by product discoloration and mechanical properties.

2. Weathering PA

In the PA by adding carbon black and other absorption of ultraviolet additives, these PA self-lubricating and metal wear greatly enhanced, forming the processing will affect the cutting and wear parts. Therefore, the need to use a strong feeding capacity and high wear resistance of the screw, barrel, a plastic head, a plastic ring, a rubber gasket combination.

3. Transparent PA

Has good tensile strength, impact resistance, rigidity, wear resistance, chemical resistance, surface hardness and other properties, high transmittance, and optical glass similar to the processing temperature of 300 - 315 ℃, molding processing, the need to Strict control of the barrel temperature, the melt temperature is too high due to degradation caused by product discoloration, the temperature is too low due to poor plastic products affect the transparency. Mold temperature as low as possible, the mold temperature will be due to crystallization of the transparency of the products reduced.

other:

Reinforced nylon

In the polyamide mixed with a variety of fibrous materials

Single casting

Features: ⑴ high molecular weight ⑵ simple process, product shapes and diverse

⑶ can be made large mechanical parts ⑷ low water absorption

Aromatic class

In the main chain in the introduction of benzene ring structure products high temperature, radiation resistance, corrosion resistance

Amorphous class

Amorphous transparent nylon

High transmittance, good dimensional stability

English abbreviations	Chinese abbreviation	Specifications	Proportion	Shrinkage%
PA	Polyamide (nylon)	PA66	1.13-1.15	0.8-1.5
PA	Polyamide (nylon)	PA66GF30	1.38	0.5
PA	Polyamide (nylon)	PA6	1.12-1.14	0.8-1.5
PA	Polyamide (nylon)	PA6GF30	1.35-1.42	0.4-0.6
PA	Polyamide (nylon)	PA66 / PA6T	1.08-1.14	0.5-1.5
PA	Polyamide (nylon)	PA6 / PA12	1.06-1.08	1.1
PA	Polyamide (nylon)	PA6 / PA12GF30	1.31-1.38	0.3
PA	Polyamide (nylon)	PA6 / PA9T	1.08-1.1	1-1.5
PA	Polyamide (nylon)	PA6 / PA10	1.07-1.09	1.2
PA	Polyamide (nylon)	PA6 / PA10GF30	1.31-1.38	0.4

[1] The performance of the dye may be different from the above values. Please refer to the Material Properties table for specific precautions.

[2] Typical values ​​refer to laboratory mean data, only for reference when used, and not as a product standard.

[3] For SGS, ROHS, UL yellow card and other reports, please call 15384233612 or contact customer service online.