Company's products

You are here: Home > Company's products > PP plastics

PP organic fill enhanced level Polypropylene

PP organic fill enhanced level Polypropylene
Product Details

PP polypropylene reinforced grade Polypropylene

Product Description Product Description

PP polypropylene reinforced grade

Product grade

Injection Molding Grade

Product appearance

Character / black / other colors / particles

Glass fiber reinforced

PP

The characteristics of the

PP

Plus fiberglass,

usually,

PP

The tensile strength of the material is

20M ~ 30MPa

between,

Bending strong

Degrees in

25M ~ 50MPa

Between, flexural modulus

800M ~ 1500MPa

between. If you want to

PP

Used in engineering structural parts, it must be reinforced with glass fiber.

PP

Plus fiberglass, reinforced by glass fiber

PP

The mechanical properties of the product can be achieved

Times or even several times to improve. Specifically, the tensile strength is achieved

65MPa ~ 90MPa

,Bending strength

Reached

70MPa ~ 120MPa

,

The flexural modulus is achieved

3000MPa ~ 4500MPa

,

This kind of mechanical strong

Degrees can be with

ABS

And enhanced

ABS

Products are comparable, and more heat resistant.

PP

Plus fiberglass, general

ABS

And enhanced

ABS

The heat resistance at the temperature

80 ℃ ~ 98 ℃ between,

While the glass fiber is reinforced

PP

The heat resistance of the material can be achieved

135 ° C to 145 ° C.

Enhanced modification

PP

The glass fiber used, the length required

0

The

4

~

0

The

6ram

If long

Less than

0

The

04mm

, Glass fiber only from the filling effect without enhancement effect, the developed countries are open

Increased filament reinforced injection material. Glass fiber content in the

40

%

(

Mass fraction

)

Content within the glass fiber

The higher the content,

PPR

Elastic Modulus,

Tension,

Bending strength is also higher.

But generally can not exceed

40

%

Otherwise the flow of decline, loss of reinforcement effect, generally in the

10

% ~

30

%.

Glass fiber reinforced PP characteristics

PP plus glass fiber, usually, PP material tensile strength between 20M ~ 30MPa, bending strength between 25M ~ 50MPa, bending modulus between 800M ~ 1500MPa. If you want to use PP on the engineering structure, you must use glass fiber to enhance.

PP plus fiberglass, glass fiber reinforced PP products through the mechanical properties can be doubled or even several times to improve. Specifically, the tensile strength of 65MPa ~ 90MPa, bending strength reached 70MPa ~ 120MPa, bending modulus reached 3000MPa ~ 4500MPa, such mechanical strength can be fully ABS and ABS products are comparable, and more heat.

PP plus glass fiber, general ABS and enhanced ABS heat resistance between 80 ℃ ~ 98 ℃, while the glass fiber reinforced PP material heat resistance temperature can reach 135 ℃ ~ 145 ℃.

Enhanced glass used in modified PP, requiring a length of 0.4 ~ 0.6ram, if the length is less than 0.04mm, fiberglass only filling effect without enhancement effect, the developed countries are developing filament reinforced injection materials. Glass fiber content in 40% (mass fraction) content, the higher the glass fiber content, PPR elastic modulus, tensile strength, bending strength is also higher. But generally can not exceed 40%, otherwise the flow of decline, loss of reinforcement effect, generally 10% to 30%.

Through the modification can change the shortcomings of PP raw materials: Xiamen Branch yuan Plastic Co., Ltd. plastic business scope includes: flame retardant PP enhanced PP cold PP toughening PP high impact PP and LFT long fiber PP .. welcome to consult the discussion! All materials are used internationally renowned brands as the base material; can be detected by the relevant national testing unit certification: free of charge to provide SGS; UL environmental protection and other test reports and material properties table ...

热门标签:PP organic fill enhanced level Polypropylene
Feedback

Reinforced grade | Fill plastic | Flame retardant | Modification | Injection molding materials | PA66 nylon | Polyamide nylon | Long glass fibre | Modified polyamide engineering plastics